#039: My Worst Job

Help support Fiber Ninja efforts through the following ways:
– Patreon: https://www.patreon.com/fiberninja
– PayPalMe: https://paypal.me/fiberninjastudios

Instagram: https://www.instagram.com/fiberninjastudios

==================================

Walk with me through what I consider to be the worst job I’ve taken on… Essentially every single aspect of this job went wrong! There was not a single thing I can think of that wasn’t a special case, exception to the rule, or flat out messed up and needed special treatment!! Learn from my mistakes people…

Not much cabling in this job but I still think it’s relevant to this field. I was first involved because I was the “phone guy” among all the technicians one of my dispatchers has.

Long Note Three by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/)
Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100424
Artist: http://incompetech.com/

How to Prepare Metal for Fabrication

Welding metal is challenging enough; don’t start off on the wrong foot by having dirty metals. Follow these cleanings tips for preparing metal for optimal welding.

How Industrial Fasteners Help In Fixing Physically Distinct Objects

The industrial fasteners are considered as the most important members of hardware family. They are widely used in the manufacturing industries for several purposes. Some of the most important industries in which these are widely used are construction, automobile, production, mechanical, etc.

A Love for Tools

I believe that I inherited my love for tools from my father. I do know, at least, that he taught me and my brother what each tool he would use was. He did this because, when he would work on our car or something in our house, he would ask for the tools by name as he needed them.

6 Tips To Choose a Contractor to Repair Plaster Walls and Ceilings

If you have an old home, its walls and ceilings may need your attention. For this job, you need to do a lot of manual work. If you are good with all the required tools, you can do the plastering on your own. But if you don’t know how to use the tools or you are too busy to do it on your own, you should look for a good plasterer. Here are 6 tips that you can use to choose a plasterer.

Tips To Get The Most From Your Li-Ion Batteries

If you want to get the most out of your Li-Ion batteries of your phone, notebook or tablet, you can use the following 6 tips. The tips can help you since some devices don’t come with a replaceable battery. Read on to know more.

What Is the Difference Between a Palm Sheet Sander and a Random Orbital Sander?

You must understand the different uses of a sander in order to choose the right one for your project. The most commonly confused sanders include sheet and orbital sanders. Learn about them both for your next sanding project.

Pipeline Reinforcement

Pipeline reinforcement is performed to increase the pipe wall thickness in non-leaking pipe defects. These defects occur due to external corrosion or damage, dents, gouges, fretting or wear at supports, internal corrosion and/ or erosion, manufacturing or fabrication defects. The Objective of pipeline reinforcement is to rebuild and increase the pipe wall thickness so that the resultant pipe mechanical strength is sufficient to withstand operating conditions.

Basic Tool List for Minor Drywall Repairs

If you are planning some minor drywall repairs, you will need a basic tool kit to get you started. Just be sure you are making the right choice to repair your drywall on your own.

4 Popular Types of Angle Grinder Discs

The angle grinder is a useful tool for grinding, polishing or cutting a variety of materials. This tool can range from the small hand-held unit to the large unit and easily works on glass to different metals.

Common Types of Drywall Screws

If you are planning to do some drywall work, you would benefit from learning about the different gypsum board nails and screws used in the industry. There are various types to choose from, so be sure to make the right choice!

Dramatically Improve Efficiency and Safety by Using a Mitre Saw Stand & Table Saw Stand Work Station

The skill saw is a tool that looks like an easy tool use in the hands of a journeyman, however, it can take months of making simple cuts for a crew boss to feel comfortable about a new employee using the saw unsupervised. This article shows how to improve efficiency and speed while at the same time improving safety on a construction site by using a state-of-the-art cutting stand and work station designed for chop saws and table saws.

Build More Efficiently Using an Impact Driver

Fasteners are one of the best ways to build decks, fences and other structures. Find out why an impact driver can speed you through your process more efficiently, and learn about one of the best options currently on the market today.

Professionals Cite The Most Common Lawn Care Tools Homeowners Need To Invest In

Investing in the right lawn care tools allow homeowners to make lawns appealing. In addition, with the guidance of experts, lawns can become healthier and greener.

Renting a Sander for Hardwood Floor Refinishing

If you are planning to refinish your hardwood floors all on your own, you will need to know how to rent a sander and how to prepare! Learn all of these tips and more!

Electric Planer: Complete Buying Guide

Wood is an imperfect material that comes from the mill with rough dimensions. If your project needs accurate, finished dimensions, you need to prepare the wood. An electric planer allows you to remove excess wood and bring the dimensions in line with the accuracy you need. This electric planer buying guide provides important specifications to consider when buy an electric planer.